1100℃高温高压双管管式炉

1100℃高温高压双管管式炉可在高压氧环境或情性气体环境下对样品进行热处理，温度可达1100℃，其炉管法兰上安装有压力表和高压卸压阀，所以当管内气压高于设定值时，卸压阀会自动打开排气，使管内气压达到设定值。所以特别是对于超导材料及介电材料的探索研究，此款高温高炉是一款物美价廉的实验工具。

The 1100 ℃ high temperature and high pressure double tube furnace can heat treat the sample in high pressure oxygen environment or emotional gas environment, the temperature can reach 1100 ℃, the furnace tube flange is installed with pressure gauge and high pressure relief valve, so when the pressure in the tube is higher than the set value, the pressure relief valve will automatically open the exhaust gas, so that the pressure in the pipe reaches the set value. Therefore, especially for the exploration and research of superconducting materials and dielectric materials, this high temperature blast furnace is a good and cheap experimental tool.

1100℃高温高压双管管式炉专为高温高压实验设计，压力高达4MPa，温度可达1100℃，并可通 入多种氧化或惰性保护气体。能合成出传统常压下不可能合成的物质（例：人工合成金刚石），而且高温高压法使得材料烧结时间变得很短，提高了合成效率（例：铁基超导体）。

The 1100 ℃ high temperature and high pressure double tube furnace is specially designed for high temperature and high pressure experiment. The pressure is as high as 4MPa, and the temperature can reach 1100 ℃. It can synthesize materials that can not be synthesized under traditional atmospheric pressure (e.g. synthetic diamond), and the sintering time of materials becomes very short by high temperature and high pressure method, which improves the synthesis efficiency (e.g. iron-based superconductor).

应用范围：

Application range:

适用于实验室需要高温高压环境并需精度控制高温高压条件的各项科学研究。它可广泛应用于压电陶瓷、铁电超导材料、磁性材料、超硬材料等新型材料的合成和物料的快速烧结等实验。

It is suitable for the scientific research of high temperature and high pressure environment and precise control of high temperature and high pressure conditions in laboratory. It can be widely used in the synthesis of new materials such as piezoelectric ceramics, ferroelectric superconductors, magnetic materials, superhard materials and so on.

1100℃高温高压双管管式炉主要功能特点：

The main features of 1100 ℃ high temperature and high pressure double tube furnace are as follows

1、采用双层壳体结构，中间有气隙隔离，并带有风冷系统，使得壳体表面温度小于60℃，

The double shell structure with air gap isolation and air cooling system makes the surface temperature of the shell less than 60 ℃,

2、加热元件采用高温含钥电阻丝

he heating element adopts high temperature keyed resistance wire

3、炉膛材料采用高纯氧化铝，可以额定程度减小能量损失，保温性能好，耐用，拉伸强度高，无杂球，纯度高。内炉膛表面涂有氧化铝涂层材料提高反射率及炉膛洁净度。

The furnace material is high purity alumina, which can reduce energy loss to the greatest extent. It has good heat preservation performance, durability, high tensile strength, no impurity ball and high purity. The inner furnace surface is coated with imported alumina coating material to improve the reflectivity and cleanliness of the furnace.

4、炉管采用无缝镍基合金管

Seamless nickel base alloy tube is used as furnace tube

1100℃高温高压双管管式炉主要参数：